ELAN Home Systems ES370 manual USBscope50 USER’S Guide Iss5

Page 16

2.Set the input range to 0.3V/div, x10 probe and coupling to

AC

3.Use the channel tab and click on the “cmp” button to turn on the compensation output

4.Set the timebase to 100us/div, and set “auto” triggering, with the trigger level set to about 0%.

5.Now connect your probe tip to the compensation output on the scope. You should see a square wave something like this

or it may look more like this

6.You may find you need to connect the ground clip to either the BNC ground or use the GND pad near the compensation

Elan Digital Systems Ltd.

16

USBscope50 USER’S GUIDE Iss5

Image 16

Contents USER’S Guide Contents Hardware Specification Page Overview General Figure below shows a simplified diagram of the USBscope50 Using More Than One USBscope50 This is a safety critical point so please note it carefully Disassembling The Stack USB Connections For Stacked Configurations Repeat this for each channel in the stack to identify them Stacking Do’s And Don’ts Input Ranges Probe Compensation USBscope50 USER’S Guide Iss5 This Acquisition Modes Random Interleaved Sampling USBscope50 USER’S Guide Iss5 Trigger Modes Normal Triggering Trigger Position USBscope50 USER’S Guide Iss5 10Trigger Threshold USBscope50 USER’S Guide Iss5 12FFT Plot Spectrum Analyser 13Math Functions 14Data Export Data for CH FFT for CH Before plugging in the hardware USBscope50 USER’S Guide Iss5 Windows 2K and XP17 Page Power Requirements Performance Static Performance Dynamic Performance