ELAN Home Systems ES370 manual

Page 4

Disclaimer

This document has been carefully prepared and checked. No responsibility can be assumed for inaccuracies. Elan reserves the right to make changes without prior notice to any products herein to improve functionality, reliability or other design aspects. Elan does not assume any liability for loses arising out of the use of any product described herein; neither does its use convey any license under its patent rights or the rights of others. Elan does not guarantee the compatibility or fitness for purpose of any product listed herein. Elan products are not authorized for use as components in life support services or systems. Elan should be informed of any such intended use to determine suitability of the products.

Software supplied with Elan PC-Cards, Compact Flash cards or USB devices is provided “as-is” with no warranty, express or implied, as to its quality or fitness for a particular purpose. Elan assumes no liability for any direct or indirect losses arising from use of the supplied code.

Copyright © 2005 Elan Digital Systems Ltd.

Federal Communications Commission (FCC) Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Increase the separation between the equipment and receiver

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult an Elan authorized dealer or service representative for help.

Elan is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Listed Products

The models covered by this installation guide are intended only for installation in Listed computers for use in business or home.

Elan Digital Systems Ltd.

4

USBscope50 USER’S GUIDE Iss5

Image 4
Contents USER’S Guide Contents Hardware Specification Page Overview General Figure below shows a simplified diagram of the USBscope50 Using More Than One USBscope50 This is a safety critical point so please note it carefully Disassembling The Stack USB Connections For Stacked Configurations Repeat this for each channel in the stack to identify them Stacking Do’s And Don’ts Input Ranges Probe Compensation USBscope50 USER’S Guide Iss5 This Acquisition Modes Random Interleaved Sampling USBscope50 USER’S Guide Iss5 Trigger Modes Normal Triggering Trigger Position USBscope50 USER’S Guide Iss5 10Trigger Threshold USBscope50 USER’S Guide Iss5 12FFT Plot Spectrum Analyser 13Math Functions 14Data Export Data for CH FFT for CH Before plugging in the hardware USBscope50 USER’S Guide Iss5 Windows 2K and XP17 Page Power Requirements Performance Static Performance Dynamic Performance