Sharp GS-XP27FR, GS-XP07FR, GS-XP09FR Timer Operation, Timer OFF, COOL/DRY Mode, Heat Mode

TIMER OPERATION

NOTE:

Before setting the timer, make sure the clock is properly set with the current time.

TIMER OFF

MODE	1h	1
FAN		2
SWING
	SET/C	3

1 Press the TIMER OFF ( ) button.

2 The TIMER OFF indicator will blink; press the TIME ADVANCE or REVERSE buttons to set the desired time. (The time can be set in 10- minute increments.)

3 Point the remote control at the signal receiver window on the unit and press the TIMER SET (SET/C) button.

•The orange TIMER lamp ( ) on the unit will light.

•The unit will generate a beep when it receives the signal.

TIPS ABOUT TIMER OFF OPERATION

When the TIMER OFF mode is set, the temperature setting is automatically adjusted to prevent the room from becoming excessively hot or too cold while you sleep. (Auto Sleep function)

COOL/DRY MODE:

•One hour after the time operation begins, the temperature setting rises 1°C higher than the original temperature setting.

HEAT MODE:

•One hour after the timer operation begins, the temperature setting drops 3°C lower than the original thermostat setting.

TO CANCEL TIMER MODE

Press the TIMER CANCEL (SET/C) button.

• The orange TIMER lamp ( ) on the unit will

turn off.
• The	current	clock
time	will be	dis-	MODE	1h
played on the re-
mote control.
			FAN
			SWING
				SET/C

NOTE:

•If any TIMER ON, TIMER OFF and ONE-HOUR OFF TIMER are set, the TIMER CANCEL but- ton cancels all settings.

TO CHANGE TIME SETTING

Cancel the TIMER setting first, then set it again.

E-12