Sharp GS-XP24FR, GS-XP07FR, GS-XP09FR, GS-XP27FR, GS-XP18FR Timer on, Select the operation condition

TIMER ON

1	Press the TIMER ON (	) button.
2	The TIMER ON indicator will blink; press the TIME
	ADVANCE or REVERSE buttons to set the de-
	sired time. (The time can be set in 10-minute
	increments.)

3 Point the remote control at the signal receiver window on the unit and press the TIMER SET (SET/C) button.

• The orange TIMER lamp ( ) on the unit will light.

• The unit will generate a beep when it receives the signal.

ENGLISH

MODE	1h		1	4
FAN			2
SWING
		SET/C	3

Select the operation condition.

•The unit will turn on prior to the set time to allow the room to reach the desired temperature by the pro- grammed time. (Awaking function)

COMBINED USE OF ON AND OFF TIMERS

You can use the ON and OFF timers in combination.

Example:

To stop operation at 11:00 p.m. and resume opera- tion (With the same mode and temperature settings) to turn on the unit by 7:00 a.m.

1 Set the TIMER OFF to 11:00 p.m. during opera- tion.

2 Set the TIMER ON to 7:00 a.m.

The arrow ( or ) between the TIMER ON

indicator and the TIMER OFF indicator shows which timer will activate first.

NOTES:

•You cannot programme the ON-TIMER and OFF-TIMER to operate the unit at different temperatures or other settings.

•Either timer can be programmed to activate prior the other.

E-13