Steamer Module Operation | 10 |
Steamer Module Operation
TIMER
The steamer module features a countdown timer located in the control panel. Refer to the illustration below.
The timer may be set in
tTo start the timer, touch + on the timer control. Touch and hold + or – until the desired time is shown in the timer display. The timer will begin its countdown in minutes, 3 seconds after the time is set.
tA warning chime will sound when the timer has one minute left and begins to countdown in seconds.
tWhen the timer reaches 0, an audible chime will sound. The chime will continue to sound every 30 seconds until CLEAR is touched.
AUTOMATIC DRAIN
IMPORTANT NOTE: The automatic drain feature will only function if water is below 140°F (60°C). It is recommended that the steamer module be installed with a drain connec- tion and access to the drain through the base cabinet.
The DRAIN touch pad operation is functional only while the module is in idle mode. The unit must be unlocked and not in operation. Refer to the illustration below.
To activate the drain:
tTouch DRAIN for 3 seconds. An audible chime will sound, the light in the DRAIN touch pad will illuminate and the drain valve will open for a period of 2 minutes. This should be enough time to drain a full capacity of water. This operation may be repeated as many times as needed to completely drain the steamer basin.
tTouch DRAIN again while in the drain mode operation to shut the drain valve. The light in the DRAIN touch pad will go out.
+ AND – |
TOUCH PADS |
TIMER DISPLAY |
IMPORTANT NOTE: If you do not have a fixed drain connection, a
CAUTION
Use caution when draining hot water from the steamer basin to avoid burns.
Timer controls.
DRAIN |
TOUCH PAD |
Automatic drain.
