Steamer Module Operation | 14 |
Water Level
WATER LEVEL SAFETY FEATURE
If there is no water in the steamer basin and the steamer module is turned on, the water level safety feature will be activated. Three chimes will sound, the light in the key symbol touch pad will flash and the word ‘Lo’ will appear in the temperature display. Power to the heating element will be automatically turned off and the module will enter lock mode.
The water level safety feature will also be activated if during extended use, water in the steamer basin boils off to a level that could damage the module.
To reset the water level safety feature:
tAdd water to the steamer basin.
tTouch CLEAR to reset the control and begin normal operation once the unit exits lock mode.
IMPORTANT NOTE: When the water level safety feature has been activated, the control may take a few minutes to reset after water has been added.
TYPE OF WATER
The type of water used in the steamer module will deter- mine how easy clean up will be. Hard water can leave calcium deposits in the steamer basin and soft water can leave salt deposits. Distilled or reverse osmosis water will leave no deposits in the steamer basin. Refer to care recommendations on page 16.
