D-Link manual Using the Configuration Interface, Factory Default Settings for the DGL-3420

Page 10

Using the Configuration Interface

Using the Configuration Interface

Requirements for using the DGL-3420’s Web Configuration Utility

If you are incorporating the DGL-3420 into a network that contains all D-Link devices, you do not need to use the Web Configuration utility. With its default settings, the DGL-3420 will connect with other D-Link 802.11a, 802.11b or 802.11g devices that are set to their default settings, with no configuration needed!

If your network contains devices other than D-Link devices, or if you wish to configure the

DGL-3420, you will need to do the following before using the Web Configuration Utility:

1 You will need a Java-enabled Web browser such as the Internet Explorer 6.0 or later, or the Netscape Navigator 7.0 or later.

2you can assign a static IP address of 192.168.0.2 and a subnet mask of 255.255.255.0 to the

computer that you will use for configuration.

(Please refer to the Troubleshooting section of this manual for more information.)You will need to assign to your PC an IP address within the network of the DGL-3420. For example,

Factory Default Settings for the DGL-3420

Operating Mode:

Infrastructure

 

 

 

 

 

 

SSID:

default

 

 

 

 

 

 

Channel:

6

 

 

 

 

 

 

 

 

Transmission rates:

Auto

 

 

 

 

Encryption:

No

 

 

 

 

 

Administrator Password:

Blank (no password needed)

 

 

 

 

 

 

IP Address Mode:

Static

 

 

 

 

 

 

IP Address:

192.168.0.30

 

 

 

 

 

 

 

 

IP Subnet:

255.255.255.0

 

 

 

 

 

 

 

 

username:

admin

 

 

10

 

 

D-Link Systems, Inc.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Contents Tools System Status Device Info Status Statistics Help Package Contents Minimum System RequirementsIntroduction Features and Benefits LEDs Wireless Basics Standards-based Technology Using the Configuration Interface Factory Default Settings for the DGL-3420Basic WizardWireless Security Setup Wizard Using the Configuration Interface LAN Settings Enable Dhcp IP Address Default Subnet Mask GatewayWireless Mode Wireless Band WirelessWireless Settings Site Survey Channel Transmission Rate Super A/G ModeWireless Security Mode WEPWireless Security Wireless Security WEPWEP Key Type WEP Keys Default WEP Key Authentication WPA-Personal Pre-Shared KeySave and Restore Configuration AdminPassword Password Verify PasswordTools System Reboot the deviceFirmware Upgrade Tools FirmwareStatus Device Info Status StatisticsHelp Troubleshooting How do I assign a static IP address in Windows XP/2000?Right-click on Local Area Connections Click Properties Click Internet Protocol TCP/IP Click PropertiesEnter the Default Gateway Select Use the following IP addressGo to the Apple Menu and select System Preferences Click Apply NowWhy doesn’t the Power LED light up? Why can’t I connect the DGL-3420 to my network? Technical Specifications Ofdm FCC Tech Support for customers within the United States Contacting Technical SupportTech Support for customers within Canada Warranty Page Page Important Note FCC Radation Exposure Statement Registration
Top Page Image Contents