D-Link DGL-3420 manual WPA-Personal, Pre-Shared Key

Page 18

Using the Configuration Interface

WPA-Personal

This option uses Wi-Fi Protected Access with a Pre-Shared Key (PSK).

Wireless Security: Wireless Security Mode:

WPA:

Pre-Shared Key:

After you have configured this page select Save Settings to save the settings, or click Don’t Save Settings if you do not wish to save them.

WPA-Personalis selected here.

When WPA is selected, select the cipher type here.

The Cipher type is the encryption algorithm used to secure the data communication.TKIP (Temporal Key Integrity Protocol) provides per packet key generation and is based on WEP. AES (Advanced Encryption Standard) is a very secure block based encryption.

Enter the secret passphrase here. WPA-PSK (Pre-shared key) provides authentication through the use of this passphrase, that is shared by devices on the network. This is the most secure encryption available without a RADIUS server.

The key is entered as a pass-phrase of up to 63 characters in ASCII format at both ends of the wireless connection.The pass-phrase cannot be shorter than 8 characters. The pass-phrase is used to generate session keys that are unique for each wireless client.

18

D-Link Systems, Inc.

Image 18
Contents Page Contents Tools System Status Device Info Status Statistics Help Package Contents Minimum System RequirementsIntroduction Features and Benefits LEDs Wireless Basics Standards-based Technology Using the Configuration Interface Factory Default Settings for the DGL-3420Basic WizardWireless Security Setup Wizard Using the Configuration Interface LAN Settings Enable Dhcp IP Address Default Subnet Mask Gateway Wireless Mode Wireless Band Wireless Wireless Settings Site Survey Channel Transmission Rate Super A/G ModeWireless Security Mode WEPWireless Security WEP Wireless SecurityWEP Key Type WEP Keys Default WEP Key Authentication WPA-Personal Pre-Shared KeySave and Restore Configuration AdminPassword Password Verify PasswordTools System Reboot the deviceFirmware Upgrade Tools FirmwareStatus Device Info Status StatisticsHelp Troubleshooting How do I assign a static IP address in Windows XP/2000?Right-click on Local Area Connections Click Properties Click Internet Protocol TCP/IP Click PropertiesEnter the Default Gateway Select Use the following IP addressGo to the Apple Menu and select System Preferences Click Apply NowWhy doesn’t the Power LED light up? Why can’t I connect the DGL-3420 to my network? Technical Specifications Ofdm FCC Contacting Technical Support Tech Support for customers within the United StatesTech Support for customers within Canada Warranty Page Page Important Note FCC Radation Exposure Statement Registration