D-Link DGL-3420 manual LAN Settings, Enable Dhcp IP Address Default Subnet Mask Gateway

Page 14

Using the Conﬁguration Interface

LAN

Your internal network settings are conﬁgured based on the IP Address and Subnet Mask assigned in this section. The IP address is also used to access this Web-based management interface. It is recommended that you use the default settings if you do not have an existing network.

LAN Settings

Enable DHCP:

IP Address:

Default Subnet Mask:

Gateway:

Check Enable to receive an IP address from a DHCP server. Check Disable to manually enter IP address information.

The IP address of the wireless gaming adapter on the local area network. The IP address assigned here is based on your local network settings. The default IP address is 192.168.0.30

The subnet mask of your wireless gaming adapter on the local area network.

The default subnet mask is 255.255.255.0

Basic > LAN

This option is used if you have multiple gateways. Enter the IP address of the gateway on your network.

14	D-Link Systems, Inc.

Image 14

Contents Page Contents Tools System Status Device Info Status Statistics Help Package Contents Minimum System RequirementsIntroduction Features and Beneﬁts LEDs Wireless Basics Standards-based Technology Using the Conﬁguration Interface Factory Default Settings for the DGL-3420 Basic WizardWireless Security Setup Wizard Using the Conﬁguration Interface LAN Settings Enable Dhcp IP Address Default Subnet Mask GatewayWireless Mode Wireless Band WirelessWireless Settings Site Survey Channel Transmission Rate Super A/G ModeWireless Security Mode WEPWEP Key Type WEP Keys Default WEP Key Authentication Wireless Security WEPWireless Security WPA-Personal Pre-Shared KeySave and Restore Conﬁguration AdminPassword Password Verify PasswordTools System Reboot the deviceFirmware Upgrade Tools FirmwareStatus Device Info Status StatisticsHelp Troubleshooting How do I assign a static IP address in Windows XP/2000?Right-click on Local Area Connections Click Properties Click Internet Protocol TCP/IP Click PropertiesEnter the Default Gateway Select Use the following IP addressGo to the Apple Menu and select System Preferences Click Apply NowWhy doesn’t the Power LED light up? Why can’t I connect the DGL-3420 to my network? Technical Speciﬁcations Ofdm FCC Tech Support for customers within Canada Contacting Technical SupportTech Support for customers within the United States Warranty Page Page Important Note FCC Radation Exposure Statement Registration