Cables to Go 29573 manual PIN Change Procedure

Page 31

APPENDIX

4.Enter the PIN of the Wireless VGA Adapter (4-digit PIN) and click Accept Association. The Wireless VGA Adapter and Wireless USB Host Adapter are now associated and ready for operation.

PIN CHANGE PROCEDURE

The default PIN setting for the Wireless VGA Device Adapter is “1234”. This section gives you the instructions to change the PIN to another 4-Digit value.

IMPORTANT: The application used to change the PIN is not supported in Vista 64bit.

1.Make sure your Wireless USB host adapter and the Wireless VGA Device Adapter are not connected to your computer.

2.Open/Launch the application “Pin Update” (C:\Program Files\Wireless USB Manager\Utility\PINUpdate). The following dialog will appear:

30

Image 31

Contents User Guide Table of Contents Introduction Features RAM 1GB System RequirementsPackage Contents Device Overview PWR Power IndicatorSOFTWARE/DEVICE Installation SOFTWARE/DEVICE Installation Important reboot/restart if prompted Figure Wireless USB Manager Do the following before installation Figure Pin Association Entry You are now ready to use the adapterVerify Connection Figure TruLink DisplayLink Manager Using the Wireless VGA Device AdapterUsing the Wireless VGA Device Adapter Extend To Screen ResolutionColor Quality Screen RotationAdvanced Wireless USB Host Adapter Reset Why can’t I install .NET? Frequently Asked QuestionsWhy is my video choppy? Video Playback Tips QPSK/DCM Technical SpecificationsCables to GO Warranty Statement There are no User Serviceable Parts Important Safety InformationAppendix Appendix Cable Association Procedure Appendix Appendix PIN Association Procedure Figure Discovery Mode in Process PIN Change Procedure Appendix Appendix Appendix