Cables to Go 29573 manual SOFTWARE/DEVICE Installation

Page 8

SOFTWARE/DEVICE INSTALLATION

IMPORTANT NOTE:

•If installing on Windows XP, Service Pack 3 (SP3) is required. Verify that this has been installed before installing the Wireless VGA Device Adapter software.

•Before installing the software, if using a Wireless USB host adapter make sure that it and the Wireless VGA Device Adapter are not connected to the computer and the Wireless VGA Device Adapter is not powered.

STEP 1-INSTALLING THE SOFTWARE

Insert the CD provided and the screen below will appear. Select the “Software Installation” from the menu.

7

Image 8

Contents User Guide Table of Contents Introduction Features System Requirements RAM 1GBPackage Contents PWR Power Indicator Device OverviewSOFTWARE/DEVICE Installation SOFTWARE/DEVICE Installation Important reboot/restart if prompted Figure Wireless USB Manager Do the following before installation You are now ready to use the adapter Figure Pin Association EntryVerify Connection Using the Wireless VGA Device Adapter Figure TruLink DisplayLink ManagerUsing the Wireless VGA Device Adapter Screen Resolution Color QualityScreen Rotation Extend ToAdvanced Wireless USB Host Adapter Reset Frequently Asked Questions Why can’t I install .NET?Why is my video choppy? Video Playback Tips Technical Specifications QPSK/DCMCables to GO Warranty Statement Important Safety Information There are no User Serviceable PartsAppendix Appendix Cable Association Procedure Appendix Appendix PIN Association Procedure Figure Discovery Mode in Process PIN Change Procedure Appendix Appendix Appendix