HP 6 VoiceTab Plus manual Packaging and transporting guidelines

Page 17
Grounding guidelines

Packaging and transporting guidelines

Follow these grounding guidelines when packaging and transporting equipment:

To avoid hand contact, transport products in static-safe tubes, bags, or boxes.

Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.

Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.

Place items on a grounded surface before removing items from their containers.

Always be properly grounded when touching a component or assembly.

Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive foam.

Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that mechanized equipment used for moving materials is wired to ground and that proper materials are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate electric charges.

Workstation guidelines

Follow these grounding workstation guidelines:

Cover the workstation with approved static-shielding material.

Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment.

Use conductive field service tools, such as cutters, screw drivers, and vacuums.

When fixtures must directly contact dissipative surfaces, use fixtures made only of static- safe materials.

Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and Styrofoam.

Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these items only at static-free workstations.

Avoid contact with pins, leads, or circuitry.

Turn off power and input signals before inserting or removing connectors or test equipment.

11

Image 17
Contents HP Slate 6 VoiceTab Plus Tablet Software terms Product noticeSafety warning notice Iv Safety warning notice Table of contents Power cord set requirements Product description Operating system Category Description Power requirementsServiceability End user replaceable part External component identification Component Locating the product number and the serial number Illustrated parts catalogComponent Spare part number Back cover Tablet major componentsMiddle frame Button Actuators Kit , includesComponent Spare part number AC adapter Miscellaneous partsHP headset Screw KitSpare part number Description Sequential part number listingTools required Removal and replacement preliminary requirementsService considerations Typical electrostatic voltage levels Relative humidity Event Grounding guidelinesPackaging and transporting guidelines Material Use Voltage protection level Equipment guidelinesTablet component replacement procedures Removal and replacement proceduresBack cover Description Spare part numberBattery Page Description Spare part number Middle frame 788635-001 Middle framePage Rear-facing webcam Middle frame see Middle frame on Antenna boardSpeaker and vibrator module System board Page Page Front-facing webcam Ambient light sensor board Page Specifications Requirements for all countries Power cord set requirementsRequirements for specific countries and regions Country/region Accredited agency Applicable note numberRequirements for specific countries and regions Recycling Jacks IndexTablet