HP 6 VoiceTab Plus manual Antenna board, Middle frame see Middle frame on

Page 25

Antenna board

Description

Spare part number

 

 

Antenna board (includes RF cable and double-sided adhesive)

773133-001

 

 

Before removing the antenna board, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 13).

5.Remove the battery (see Battery on page 14).

6.Middle frame (see Middle frame on page 16)

Remove the antenna board:

1.Disconnect the RF antenna cable from the system board antenna terminal (1).

2.Release the RF antenna from the retention clips (2) built into the display panel assembly.

3.Detach the antenna board (3) from the display panel assembly. (The antenna board is attached to the display panel assembly with double-sided adhesive.)

4.Remove the antenna and RF cable.

Antenna board 19

Image 25
Contents HP Slate 6 VoiceTab Plus Tablet Software terms Product noticeSafety warning notice Iv Safety warning notice Table of contents Power cord set requirements Product description Serviceability End user replaceable part Category Description Power requirementsOperating system External component identification Component Locating the product number and the serial number Illustrated parts catalogComponent Spare part number Back cover Tablet major componentsMiddle frame Button Actuators Kit , includesComponent Spare part number AC adapter Miscellaneous partsHP headset Screw KitSpare part number Description Sequential part number listingService considerations Removal and replacement preliminary requirementsTools required Typical electrostatic voltage levels Relative humidity Event Grounding guidelinesPackaging and transporting guidelines Material Use Voltage protection level Equipment guidelinesTablet component replacement procedures Removal and replacement proceduresBack cover Description Spare part numberBattery Page Description Spare part number Middle frame 788635-001 Middle framePage Rear-facing webcam Middle frame see Middle frame on Antenna boardSpeaker and vibrator module System board Page Page Front-facing webcam Ambient light sensor board Page Specifications Requirements for all countries Power cord set requirementsRequirements for specific countries and regions Country/region Accredited agency Applicable note numberRequirements for specific countries and regions Recycling Jacks IndexTablet