Panasonic SC-HT940 To adjust speaker level during play, Enhancing the bass sound, Subwoofer level

Enhancing the bass sound:	H.BASS
H.BASS

You can enhance low-frequency sound so that heavy bass sound can be heard clearly, even if the acoustics of your room are not optimal. The unit automatically selects the most suitable setting according to the type of playback source.

Press [H.BASS].

ST	SRD E.
	HDCD
	H.BASS
	W PGM
	1

≥[DVD-V] [DVD-VR]

H.BASS ON (factory preset),------.H.BASS OFF

≥When another source is selected

H.BASS OFF (factory preset),------.H.BASS ON

The setting you make is retained, and recalled every time you play from the same type of source.

Adjusting the amount of bass:	SUB WOOFER
Subwoofer level	LEVEL

You can adjust the amount of bass. The unit automatically selects the most suitable setting according to the type of playback source.

Press [SUB WOOFER LEVEL].

≥[DVD-V] [DVD-VR]

SUB W 4 (factory preset)§#SUB W 1#SUB W 2#SUB W 3

^------------------------------------------------------------------------------------------------ }

≥When another source is selected

SUB W 2 (factory preset)§#SUB W 3#SUB W 4#SUB W 1

^------------------------------------------------------------------------------------------------ }

≥To check the current setting, press [SUB WOOFER LEVEL].

≥The setting you make is retained, and recalled every time you play the same type of source, except when Sound Field Control (MOVIE, SPORT or MUSIC) is turned on.

§When Sound Field Control (MOVIE, SPORT or MUSIC) is on, the factory presets are as follows:

–MOVIE: SUB W 4

–SPORT: SUB W 2

–MUSIC: SUB W 1

.

Adjusting the volume of each	TEST
speaker: Speaker level adjustments

This is one of the ways to get appropriate surround effects.

Preparation

Press [DVD].

1	While stopped and no on-screen display is shown
	Press [TEST] to output a test signal.
	≥To stop the test signal, press [TEST] again.
	L: Front left	C: Center	R: Front right
	RS: Right surround	LS: Left surround
	≥There is no output from SW (subwoofer) channel.
2	Press [VOLUME, r] or [s] to set the volume level
	normally used for listening.
3	Press [3] (increase) or [4] (decrease) to adjust the
	speaker level for each speaker.

≥Adjust the speaker levels to the same level as the front speakers. C, RS, LS: `6 dB to i6 dB

∫To adjust speaker level during play

(Effective when playing multi-channel audio or when Dolby Pro Logic II or Sound Field Control (MOVIE, SPORT or MUSIC) is on, and Surround Music is off.)

1	^----------------------------------------------------	}	effects
	Press [CH SELECT] to select the speaker.
	L #C #R #RS #LS #SW		sound
	channel.
	SW: Subwoofer
	≥You can adjust SW only if the disc includes a subwoofer		Using
	≥“S” appears on the display when “MOVIE”, “SPORT” or
	≥“SW” does not appear on the display and is not adjustable

when “ÎPLII” is lit.

“MUSIC” is selected with Sound Field Control (➜ page 28). In this case, you can adjust both surround speaker levels at the same time using [3, 4].

S: `6 dB to i6 dB

2Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker.

C, RS, LS, SW: `6 dB to i6 dB

(L, R: Only the balance is adjustable.)

≥To adjust the balance of the front speakers, while “L” or “R” is selected, press [2, 1].

RQT8582

29