Top cover
Description | Spare part number |
|
|
Top cover with TouchPad (includes battery release latch, NFC board antenna cable, power | |
connector cover, and |
|
|
|
Before removing the Top cover, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 28).
5.Remove the service door (see Service door on page 30).
6.Remove the keyboard (see Keyboard on page 41).
Remove the Top cover:
1.Remove the two Phillips M2.0×4.3 screws that secure the Top cover to the computer.
2.Close the computer.
3.Turn the computer upside down, with the rear toward you.
4.Disconnect the microphone cable (1) from the system board.
Component replacement procedures | 45 |