Reverse this procedure to install the back cover.
Battery
Description | Spare part number |
|
|
Battery | |
|
|
Before removing the battery, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 12).
WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To prevent loss of information, save your work or shut down the tablet through Windows before removing the battery.
Remove the battery:
1.Disconnect the battery cable (1) from the system board.
2.Release the battery cable from the retention clip (2) built into the display panel assembly.
3.Insert a thin, plastic tool (3) between the battery and the display panel assembly.
4.Detach the battery (4) from the display panel assembly. (The battery is attached to the display panel assembly with
14 Chapter 5 Removal and replacement procedures