HP 7 Plus II 1331 manual Rear-facing webcam, Description Spare part number

Rear-facing webcam

Description	Spare part number
Rear-facing webcam (2.0-MP, fixed-focus, HD; includes cable)	790595-001

Before removing the rear-facing webcam, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 12).

5.Disconnect the battery cable from the system board (see Battery on page 14).

Remove the rear-facing webcam:

1.Disconnect the rear-facing webcam cable (1) from the system board.

2.Remove the rear-facing webcam (2) and cable from the molding built into the display panel assembly.

NOTE: If the rear-facing webcam rubber lens cover (3) should become lost or damaged when removing the rear-facing webcam, a replacement cover is available in the Rubber Kit, spare part number 790598-001.

Reverse this procedure to install the rear-facing webcam.

Rear-facing webcam 19