HP 436853-001 manual Ipmi 2.0 support, Specific commands, Map1/- version Version

Page 27

•The start command causes a target to change state to a higher run level.

•The stop command causes a target to change state to a lower run level.

•The version command queries the version of the CLP implementation or other CLP elements. For example:

/./map1/-> version Version 1.00

/./map1/-> cd firmware /./map1/firmware/-> version Version 1.00

/./map1/firmware/-> show

/./map1/firmware

Targets

Properties

fwversion=0.59

Verbs

cd

version

exit

show

reset

load

help /./map1/firmware/-> show fwversion fwversion=0.59

/./map1/firmware/-> fwversion Invalid command

/./map1/firmware/->

Specific commands

CLP syntax for specific commands is found in the sections that also describe the functionality through the Web interface.

IPMI 2.0 support

LO100 supports the industry-standard IPMI 2.0. The IPMI specification defines standardized, abstracted interfaces that can be used for monitoring and control functions that are built in to the platform hardware.

In addition to supporting the mandatory commands for IPMI 2.0, the following additional IPMI 2.0 features are supported by LO100:

•Additional IPMI 2.0 commands o Get Channel Cipher Suites

o Set/Get Channel Security Keys

o Suspend/Resume Payload Encryption

Using LO100 27

Image 27

Contents HP ProLiant Lights-Out 100 Remote Management User Guide Audience assumptions Contents Acronyms and abbreviations Index Server management Server management featuresOperational overview User guide overviewOperational overview Installation Remote management card kit contentsPre-installation procedures Installation Post-installation procedures Installation Configuration Configuring network accessEstablishing user accounts Enabling serial access to the LO100 Using the serial portLO100 serial port configuration Using TCP/IP over Ethernet management portSelecting an Ethernet management port Obtaining a Dhcp IP address from the Bios Setup UtilityEnabling telnet and Http services Setting up a static IP address from the Bios Setup UtilityUpdating the firmware Updating the firmware remotelyRompaq /D infile outfile Tftp settings Configuration SSL overview Using LO100Ssh -l loginname ipaddress/dns name Putty.exe -ssh -telnet -rlogin -raw user@hostSSH overview Installing a certificate or private key through the CLP Importing a certificateCreating a certificate Load -source URI -oemhpfiletype key Using CLPHelp o load o reset o set CLP overviewHelp show Usage show targetoptionsproperties Show -h Base commandsShow Start Stop Exit Version Help/-h All/-aShow -help Usage show targetoptionsproperties Using LO100 Rompaq /D infile outfile Specific commands Ipmi 2.0 supportMap1/- version Version Logging in through a web browser Logging in to LO100Logging in through the CLP Browser main menu optionsHardware Inventory Controlling server power remotelySystem1/ start /system1 System1 started Controlling server power from a browserControlling server power through the CLP System1/ reset System1 resetViewing sensors data from a web browser Controlling server power through the Bios Setup UtilityViewing sensors data from the Bios Setup Utility Monitoring sensorsPlatform event filtering configuration Accessing the system event log from a web browser Using the system event logAccessing the system event log from the CLP Accessing the system event log from the Bios Setup UtilityEnter cd /./system1/log1 Network settings Configuring network settings using a web browserConfiguring network settings using the CLP Configuring network settings using the Bios Setup Utility Using the virtual floppy feature Configuring virtual floppy from a Web browser Configuring the Tftp ServerConfiguring the virtual floppy from the Bios setup Configuring virtual floppy from the CLPSet oemhpvsitftpserver=10.12.52.142 Set oemhpvsipermission=rw Platform event trap configurationRebooting the server Set oemhpvsipath=rbootChanging user settings through a web browser User administrationAccessing the remote console through telnet Changing user settings through the CLPBios console text redirection through telnet Linux console redirection S012345respawn/sbin/agetty -L 115200 ttyS0 vt102 Microsoft Windows EMS managementHP SIM support Acronyms and abbreviations KCS SSL Index ROMPaq utility Safety considerations Index