HP 436853-001 manual Post-installation procedures

Page 9

Installing the remote management card on ProLiant ML150 G2 servers

1.Remove the access panel.

2.Lay the server on its unexposed side to access the system board.

3.Locate the remote management card connectors on the system board.

4.Install the remote management card in the connectors on the system board.

5.Reinstall the system covers following the "Post-installation procedures (on page 9)".

6.Verify BIOS version and switch settings for the card.

To ensure proper operation of the ProLiant ML150 G2 Lights-Out 100 remote management processor, the server BIOS must be version 0.28 or later. You can download the latest BIOS for your server on the HP website (http://www.hp.com/support).

The remote management card switches must be set to factory default settings.

Switch	Setting

SW1	Off

SW2	On

SW3	On

SW4	Off

Post-installation procedures

1.Be sure all components are installed according to the "Pre-installation procedures (on page 7)."

2.Be sure you have not left any loose tools or parts inside the server.

3.Reinstall any expansion boards, peripherals, board covers, and system cables previously removed.

4.Reinstall the system covers.

5.Connect all external cables and the AC power cord to the system.

Installation 9

Image 9

Contents HP ProLiant Lights-Out 100 Remote Management User Guide Audience assumptions Contents Acronyms and abbreviations Index Operational overview Server management featuresUser guide overview Server managementOperational overview Installation Remote management card kit contentsPre-installation procedures Installation Post-installation procedures Installation Configuration Configuring network accessEstablishing user accounts Enabling serial access to the LO100 Using the serial portLO100 serial port configuration Using TCP/IP over Ethernet management portSelecting an Ethernet management port Obtaining a Dhcp IP address from the Bios Setup UtilityEnabling telnet and Http services Setting up a static IP address from the Bios Setup UtilityUpdating the firmware Updating the firmware remotelyRompaq /D infile outfile Tftp settings Configuration SSL overview Using LO100Ssh -l loginname ipaddress/dns name Putty.exe -ssh -telnet -rlogin -raw user@hostSSH overview Installing a certificate or private key through the CLP Importing a certificateCreating a certificate Help o load o reset o set Using CLPCLP overview Load -source URI -oemhpfiletype keyShow Start Stop Exit Version Base commandsHelp/-h All/-a Help show Usage show targetoptionsproperties Show -hShow -help Usage show targetoptionsproperties Using LO100 Rompaq /D infile outfile Specific commands Ipmi 2.0 supportMap1/- version Version Logging in through a web browser Logging in to LO100Logging in through the CLP Browser main menu optionsHardware Inventory Controlling server power remotelyControlling server power through the CLP Controlling server power from a browserSystem1/ reset System1 reset System1/ start /system1 System1 startedViewing sensors data from the Bios Setup Utility Controlling server power through the Bios Setup UtilityMonitoring sensors Viewing sensors data from a web browserPlatform event filtering configuration Accessing the system event log from a web browser Using the system event logAccessing the system event log from the CLP Accessing the system event log from the Bios Setup UtilityEnter cd /./system1/log1 Network settings Configuring network settings using a web browserConfiguring network settings using the CLP Configuring network settings using the Bios Setup Utility Using the virtual floppy feature Configuring virtual floppy from a Web browser Configuring the Tftp ServerConfiguring the virtual floppy from the Bios setup Configuring virtual floppy from the CLPSet oemhpvsitftpserver=10.12.52.142 Rebooting the server Platform event trap configurationSet oemhpvsipath=rboot Set oemhpvsipermission=rwChanging user settings through a web browser User administrationAccessing the remote console through telnet Changing user settings through the CLPBios console text redirection through telnet Linux console redirection S012345respawn/sbin/agetty -L 115200 ttyS0 vt102 Microsoft Windows EMS managementHP SIM support Acronyms and abbreviations KCS SSL Index ROMPaq utility Safety considerations Index