HP manual Specifications, HP Compaq t5720/t5725 Thin Client

Page 23

A

Specifications

HP Compaq t5720/t5725 Thin Client

Dimensions

 

 

Height

9.85 in

250.18 mm

Width

2.59 in

65.71 mm

Depth

8.09 in

205.55 mm

 

 

 

Approximate Weight

3.7 lb

1.7 kg

 

 

 

Temperature Range (fanless design)*

 

 

Operating**

50° to 104° F

10° to 40° C

(max. rate of change is 10° C per hour or

 

 

18° F per hour)

 

 

Nonoperating

-22°to 140° F

-30°to 60° C

(max. rate of change is 20° C per hour or

 

 

36° F per hour)

 

 

*Specifications are at sea level with altitude derating of 1° C/300m (1.8° F/1000ft) to a maximum of 3Km (10,000ft), with no direct, sustained sunlight. Upper limit may be limited by the type and number of options installed.

**The operating temperature range when the

thin client is attached to a flat panel using the HP Quick Release is 50° - 95°F (10°-35°C).

Hardware Reference Guide

www.hp.com

A-1

Image 23
Contents Hardware Reference Guide Hardware Reference Guide Contents Index Standard features Product featuresFront panel components Front panel componentsRear panel components Rear panel componentsSystem board components System board componentsEnhanced keyboard components Using the keyboardAlt key Windows Logo KeyAdditional function keys Special mouse functionsSerial number location Product features General hardware installation sequence Hardware upgradesHardware upgrades Removing and replacing the chassis cover Flash memory upgrade Installing thin client optionsInstalling flash memory Sodimm upgrade PCI Expansion Module Installing PCI riser card Installing a PCI card and PCI Expansion Module chassis cover MultiBay hard drive and diskette drive Internal batteryHP Compaq t5720/t5725 Thin Client SpecificationsPower Supply Securing the thin client Security provisionsSecurity provisions HP Quick Release Mounting the thin clientConnecting the HP Quick Release to the thin client Connecting the HP Quick Release to another device Connecting the thin client Supported mounting options You can mount the thin client on a wall You can mount the thin client under a desk Non-supported mounting option Preventing electrostatic damage Electrostatic dischargeGrounding methods Routine thin client care Thin client operationSupported orientations You can lay thin clients horizontally Non-supported orientations Do not stack thin clients Do not block the vents of the thin client Shipping preparation Shipping informationImportant service repair information Index PCI Index-3 Index Index-4
Related manuals
Manual 47 pages 11.33 Kb