HP t5725 manual Thin client operation, Routine thin client care

Page 37

E

Thin client operation

Routine thin client care

Use the following information to properly care for your thin client:

Operate the thin client on a sturdy, level surface. Leave a 1-inch (2.5-cm) clearance around the air vents to permit the required airflow.

Never operate the thin client with the outside panel removed.

Never restrict the airflow into the thin client by blocking the vents or air intake.

Keep the thin client away from excessive moisture, direct sunlight, and extreme heat and cold. For information about the recommended temperature and humidity ranges for the thin client, see Appendix A, “Specifications”.

Keep liquids away from the thin client and keyboard.

Turn off the thin client before you do either of the following:

Wipe the exterior of the thin client with a soft, damp cloth as needed. Using cleaning products may discolor or damage the finish.

Occasionally clean the air vents of the thin client. Lint and other foreign matter can block the vents and limit airflow.

Hardware Reference Guide

www.hp.com

E-1

Image 37
Contents Hardware Reference Guide Hardware Reference Guide Contents Index Standard features Product featuresFront panel components Front panel componentsRear panel components Rear panel componentsSystem board components System board componentsEnhanced keyboard components Using the keyboardAlt key Windows Logo KeySerial number location Special mouse functionsAdditional function keys Product features General hardware installation sequence Hardware upgradesHardware upgrades Removing and replacing the chassis cover Flash memory upgrade Installing thin client optionsInstalling flash memory Sodimm upgrade PCI Expansion Module Installing PCI riser card Installing a PCI card and PCI Expansion Module chassis cover MultiBay hard drive and diskette drive Internal batteryHP Compaq t5720/t5725 Thin Client SpecificationsPower Supply Securing the thin client Security provisionsSecurity provisions HP Quick Release Mounting the thin clientConnecting the HP Quick Release to the thin client Connecting the HP Quick Release to another device Connecting the thin client Supported mounting options You can mount the thin client on a wall You can mount the thin client under a desk Non-supported mounting option Preventing electrostatic damage Electrostatic dischargeGrounding methods Routine thin client care Thin client operationSupported orientations You can lay thin clients horizontally Non-supported orientations Do not stack thin clients Do not block the vents of the thin client Shipping preparation Shipping informationImportant service repair information Index PCI Index-3 Index Index-4
Related manuals
Manual 47 pages 11.33 Kb