HP t5720 manual Logging off, restarting, and shutting down the thin client, Enhanced Write Filter

Logging off, restarting, and shutting down the thin client

To restart, shut down, or log off from the thin client, click Start > Shut Down. From the Shut Down dialog box, select the desired action, and then click OK.

NOTE: You may also log off or shut down using the Windows Security dialog box. Press Ctrl+Alt +Del to open the dialog box.

If automatic logon is enabled, when you log off (without shutting down) the thin client immediately logs on the default user. For instructions for logging on as a different user, see Logging on on page 5.

The following utilities are affected by logging off, restarting, or shutting down the thin client:

●Enhanced Writer Filter

●Power Management

●System Time

Enhanced Write Filter

For detailed information about the Enhanced Write Filter, see Enhanced Write Filter Manager

on page 29. If you want to save changes to system configuration settings, you must disable the write filter cache or issue the -commitcommand during the current boot session. Otherwise, the new settings will be lost when the thin client is shut down or restarted. Enable the write filter when you no longer want to make permanent changes

The write filter cache contents are not lost when you log off and on again (as the same or different user). You may disable the write filter cache after the new logon and still retain the changes.

A user logon account does not have write filter disabling privileges; this is a local or remote administrator function.

ENWW Logging off, restarting, and shutting down the thin client 7