To keep the mappings after the thin client is rebooted:
1.Disable the write filter cache during the current boot session or issue the
2.Select Reconnect at Logon.
Because a user logon cannot disable the write filter cache, you can retain the mappings by logging off the user (do not shut down or restart) and logging back on as Administrator, and then disabling the write filter.
You can also assign the remote home directory by using a user manager utility or by other means known to administrators.
Roaming profiles
Write roaming profiles to the C drive. The profiles need to be limited in size and will not be retained when the thin client is rebooted.
NOTE: For roaming profiles to work and be downloaded, there must be sufficient flash space available. In some cases it may be necessary to remove software components to free up space for roaming profiles.
10 Chapter 2 Configuration | ENWW |