HP 2760p manual Computer Setup

Enable/disable the ExpressCard slot. Enable/disable the Smart card slot. Enable/disable the eSATA port.

Enable/disable the USB port.

CAUTION: Disabling the USB port also disables MultiBay devices and ExpressCard devices on the advanced port replicator.

Select	To do this
Built-In Device Options	●	Enable/disable the wireless button state (enabled by
		default).
	●	Enable/disable embedded WWAN device radio (select
		models only; enabled by default).
	●	Enable/disable embedded WLAN device radio (select
		models only; enabled by default).
	●	Enable/disable the embedded Bluetooth device radio
		(enabled by default).
	●	Enable/disable the network interface controller (enabled
		by default).
	●	Enable/disable LAN/WLAN switching (disabled by
		default).
	●	Set the wake on LAN state. Options include the
		following:
		◦	Disabled
		◦	Boot to Network
		◦	Follow Boot Order
	●	Enable/disable the ambient light sensor.
	●	Enable/disable the fingerprint device (enabled by
		default).
	●	Enable/disable the integrated camera (enabled by
		default).
	●	Enable/disable the power monitor circuit (enabled by
		default).
	●	Enable/disable the audio device (enabled by default).
	●	Enable/disable a modem device (enabled by default).
	●	Enable/disable the microphone (enabled by default).
	●	Enable/disable the internal speakers (enabled by
		default).
Port Options	NOTE:		All port options are enabled by default.

● Enable/disable the flash media reader.

●

● Enable/disable the 1394 port.

●

●

●

92 Chapter 5 Computer Setup