HP 2760p manual Hard drive, Description Spare part number

Hard drive

NOTE: The hard drive spare part kits include the bracket and the screws.

Description		Spare part number
320	GB, 7200 rpm, 7 mm (2.5 in) SED hard drive	656621-001
320	GB, 7200 rpm, 7 mm (2.5 in) hard drive	656620-001
250	GB, 7200 rpm, 7 mm (2.5 in) hard drive	656619-001
160	GB solid-state drive (SSD)	653018-001
128	GB SSD	653017-001

Before removing the hard drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.

4.Remove the following components:

a.Remove the battery (see Battery on page 43)

b.Remove the service access cover (see Service access cover on page 44)

Remove the hard drive:

1.Loosen the Phillips M2.5×8.0 captive screw (1) that secures the hard drive bracket to the computer.

2.Grasp the tab on the hard drive and slide it forward to disconnect the hard drive.

48 Chapter 4 Removal and replacement procedures