HP 8 Pro 7600ca, 8 Pro 7600us manual Microphone

Page 33

4.Detach the GPS antenna transceiver (3) from the display panel assembly. (The GPS antenna transceiver is attached to the display panel assembly with double-sided adhesive.)

5.Remove the GPS antenna transceiver and cable. Reverse this procedure to install the GPS antenna.

Microphone

Description

Spare part number

 

 

Microphone (includes cable)

743927-001

 

 

Before removing the microphone, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 13).

Microphone 27

Image 33
Contents HP Slate8 Pro Product notice Safety warning notice Iv Safety warning notice Table of contents Specifications Power cord set requirements Panel Product descriptionProduct description External component identification External component identification Locating the serial number, product number, and model number Illustrated parts catalogLTE antenna Tablet major componentsSequential part number listing Miscellaneous partsIllustrated parts catalog Removal and replacement preliminary requirements Service considerationsTools required Electrostatic discharge damage Grounding guidelinesPackaging and transporting guidelines Equipment guidelines Removal and replacement procedures Tablet component replacement proceduresBack cover Display panel cable Page Board cable Page Battery Page Board Speakers Page Wlan antenna Page GPS antenna Page Microphone Page Rear-facing webcamera Page Front-facing webcamera Power button board Page Page Volume button board Page LTE antenna System board Page Page Page Specifications Power cord set requirements Requirements for all countriesRequirements for specific countries and regions Power cord set requirements Recycling Hdmi IndexTablet