HP Rlve 810 G1 manual Using Advanced System Diagnostics

Page 88

Using Advanced System Diagnostics

Advanced System Diagnostics allows you to run diagnostic tests to determine if the computer hardware is functioning properly. The following diagnostic tests are available in Advanced System Diagnostics:

●System Tune-Up—This group of additional tests checks your computer to make sure that the main components are functioning correctly. System Tune-Up runs longer and more comprehensive tests on memory modules, hard drive SMART attributes, the hard drive surface, the battery (and battery calibration), video memory, and the WLAN module status.

●Start-up test—This test analyzes the main computer components that are required to start the computer.

●Run-in test—This test repeats the start-up test and checks for intermittent problems that the start-up test does not detect.

●Hard disk test—This test analyzes the physical condition of the hard drive, and then checks all data in every sector of the hard drive. If the test detects a damaged sector, it attempts to move the data to a good sector.

●Memory test—This test analyzes the physical condition of the memory modules. If it reports an error, replace the memory modules immediately.

●Battery test—This test analyzes the condition of the battery and calibrates the battery if necessary. If the battery fails the test, contact HP support to report the issue and purchase a replacement battery.

●BIOS Management—You can update or rollback the version of the BIOS on the system. Do not shut down or remove external power during the process. You will be given a confirmation screen before your BIOS is modified. Select BIOS update, BIOS Rollback, or Back to main menu.

You can view system information and error logs or select languages in the Advanced System Diagnostics window.

To start Advanced System Diagnostics:

1.Turn on or restart the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is displayed, press f2.

2.Click the diagnostic test you want to run, and then follow the on-screen instructions.

NOTE: If you need to stop a diagnostics test while it is running, press esc.

78 Chapter 12 Computer Setup (BIOS) and Advanced System Diagnostics

Page 87 Page 89
Image 88
Page 87 Page 89
Contents User Guide Product notice Software termsSafety warning notice Iv Safety warning notice Table of contents Multimedia External cards and devices Using Disk Defragmenter Using Disk Cleanup Contacting support Labels Page Welcome Finding information Resources For information aboutThen select Warranty and services Getting to know your computer TopTouchPad Component DescriptionLights Keys Fn keyRight Computer , and then select User guidesLeft Ports, see Using a USB device on RearDisplay To change your notebook to a tablet Select the HP Support Assistant appBottom Connecting to a wireless network Connecting to a networkUsing the wireless controls Using the wireless button Using a WlanUsing operating system controls Setting up a Wlan Using an Internet service providerConfiguring a wireless router Connecting to a Wlan Protecting your WlanUsing HP Mobile Broadband select models only Inserting and removing a SIM Using GPS select models only Using Bluetooth wireless devices select models onlyConnecting to a wired network Connecting to a local area network LANSetting pointing device preferences Using pointing devicesUsing the TouchPad Using TouchPad Gestures Turning the TouchPad off and onOne-finger slide Scrolling Edge swipes select models only Right-edge swipeTop-edge swipe Left-edge swipeUsing Microsoft Windows 8 shortcut keys Using the keyboardShortcut Key Description Identifying the hot keys Hot key combination DescriptionUsing keypads Using the embedded numeric keypadUsing an optional external numeric keypad Turning the embedded numeric keypad on and offUsing the media activity controls Connecting speakersMultimedia AudioConnecting headphones Adjusting the volumeChecking audio functions on the computer Webcam select models only VideoDisplayPort Power management Shutting down the computerSetting power options Using power-saving statesIntel Rapid Start Technology select models only Initiating and exiting SleepSetting password protection on wakeup Using the power meter and power settingsEnabling and exiting user-initiated Hibernation Using battery power Finding additional battery informationDisplaying the remaining battery charge Maximizing battery discharge timeManaging low battery levels Identifying low battery levelsInserting or removing the battery Conserving battery power Storing a user-replaceable batteryDisposing of a user-replaceable battery Replacing a user-replaceable batteryUsing external AC power Testing an AC adapter External cards and devices Using Media Card Reader cards select models onlyInserting a digital card Using a USB device Removing a digital cardConnecting a USB device Removing a USB deviceUsing optional external devices Using optional external drivesUsing the docking connector select models only Drives Handling drivesRemoving or replacing the service door Using hard drivesIntel Smart Response Technology select models only Removing the service door Remove the battery see Inserting or removing the battery onReplacing the service door Replacing or upgrading the hard driveRemoving the hard drive Using Disk Defragmenter Installing a hard driveImproving hard drive performance Using Disk Cleanup Security Computer risk Security featureProtecting the computer Using passwords Setting passwords in Windows Setting passwords in Computer SetupPassword Function If the Embedded Security State is set to EnabledManaging a Bios administrator password Setting a new Bios administrator passwordUsing antivirus software Entering a Bios administrator passwordInstalling critical security updates Using firewall softwareUsing HP Client Security Manager select models only Installing an optional security cable Maintenance Adding or replacing memory modulesPage Page Cleaning your computer Cleaning productsCleaning procedures Cleaning the displayUpdating programs and drivers Using SoftPaq Download Manager Cleaning the TouchPad and keyboardBackup and recovery Performing a system recovery Backing up your informationUsing the Windows recovery tools Using f11 recovery tools Using Windows 8 operating system media purchased separatelyUsing Windows Refresh for quick and easy recovery Remove everything and reinstall WindowsUsing HP Software Setup Computer Setup Bios and Advanced System Diagnostics Using Computer SetupStarting Computer Setup Navigating and selecting in Computer SetupRestoring factory settings in Computer Setup Determining the Bios version Updating the BiosDownloading a Bios update Page Using Advanced System Diagnostics Support Contacting supportLabels ComponentInput power SpecificationsInput Power Rating Operating environment Traveling with the computer Page Troubleshooting Troubleshooting resourcesResolving issues Computer is unable to start upComputer screen is blank Software is functioning abnormallyComputer is on but not responding Computer is unusually warmWireless network connection is not working An external device is not workingElectrostatic discharge Index USBSIM SIM
Related manuals
Manual 73 pages 19.53 Kb

Rlve 810 G1 specifications

The HP Rlve 810 G1 is a versatile and powerful mobile workstation designed for professionals who need robust performance and portability in a compact package. Launched by Hewlett-Packard, this device is particularly attractive for users in demanding fields like engineering, design, or financial modeling, where powerful computational capabilities and graphics performance are non-negotiable.

One of the standout features of the HP Rlve 810 G1 is its lightweight design. Weighing just over three pounds, this mobile workstation is easy to carry, making it an ideal choice for on-the-go professionals. The device boasts a sleek profile, allowing it to slip into a briefcase or a backpack without adding significant bulk. Despite its compact size, HP has managed to pack an impressive amount of technology into the Rlve 810 G1.

Powered by the latest Intel Core processors, the Rlve 810 G1 offers exceptional performance, ensuring that users can multitask effortlessly between heavy applications. Its architecture is designed to optimize energy efficiency, providing longer battery life—a critical factor for mobile users. Accompanied by a substantial amount of RAM, the laptop can handle memory-intensive tasks with ease.

For graphics, the HP Rlve 810 G1 features integrated Intel HD Graphics, which provides sufficient power for everyday tasks and light graphic design work. However, for more advanced graphical needs, the device can be configured with dedicated graphics options, offering enhanced performance for 3D modeling and rendering applications.

Additionally, the HP Rlve 810 G1 incorporates a high-resolution display that ensures crisp visuals and sharp text, improving productivity by reducing eye strain during prolonged use. The touchscreen capabilities further enhance user interaction, allowing for intuitive navigation and control.

The device also emphasizes connectivity, with multiple ports available including USB 3.0, HDMI, and Ethernet options. This ensures users can connect to various peripherals and networks easily, enhancing versatility in diverse work environments.

Security features are integrated into the HP Rlve 810 G1, providing peace of mind for users who handle sensitive data. With options for a fingerprint reader and advanced encryption capabilities, the device is equipped to safeguard vital information.

Overall, the HP Rlve 810 G1 combines portability, performance, and security in a streamlined package, making it an excellent choice for professionals looking for a dependable mobile workstation. Its blend of features ensures a productive and efficient work experience, whether in the office or on the move.
Top Page Image Contents