HP DS73TP manual Primary DNS

Type “1” (Module IP Address), at the end of the main configuration menu and you can program the IP address. The DS73 will respond with:

Enter Module IP address in dotted decimal form:

Enter the desired Module IP address as a series of four numbers separated by periods (e.g., 197.3.14.9) followed by Carriage Return .

NOTE: The first part of the Module IP address is determined by assigned network address.

IMPORTANT: The Module IP address must be programmed before the DS73 module can be accessed on the network. After programming the IP address, the unit must be reset for the new information to take effect.

5.2DIAL-IN IP ADDRESS

Type “2” (Dial-in IP Address) at the end of the main configuration menu and you can program the Dial-in IP address. The DS73 will respond with:

Enter Dial-in IP address in dotted decimal form:

Enter the desired Dial-in IP address as a series of four numbers separated by periods (e.g., 197.3.14.9) followed by Carriage Return .

NOTE: The first part of the Module IP address is determined by assigned network address.

IMPORTANT: The Module IP address must be programmed before the DS73 module can be accessed on the network. After programming the IP address, the unit must be reset for the new information to take effect.

8.3SUBNET MASK

Type “3”(Subnet Mask) at the end of the main configuration menu and you can program the Subnet Mask. The DS73 will respond with:

Enter Subnet Mask in dotted decimal form:

Enter the desired Subnet Mask as a series of four numbers separated by periods (e.g., 255.255.255.0) followed by Carriage Return .

IMPORTANT: The Subnet Mask must be programmed before the DS73 module can be accessed on the network. After programming the Subnet Mask, the unit must be reset for the new information to take effect.

8.4GATEWAY

Type “4”(Gateway) at the end of the main configuration menu and you can program the Gateway or router address. The DS73 will respond with:

Enter Gateway address in dotted decimal form:

Enter the desired Gateway or router address as a series of four numbers separated by periods (e.g., 197.3.14.1) followed by Carriage Return .

IMPORTANT: After programming the Gateway address, the unit must be reset for the new information to take effect.

8.5Primary DNS

Type “5”(Primary DNS) at the end of the main configuration menu and you can program the Primary DNS. The DS73 will respond with:

10