HP DS73TP manual Module IP Address, Network Cable Connections good

Bay Technical Associates
Port Select Code: $BT
Attention Character:	;
DS73	(2,1)	1
Device A	(3,1)	2
Device B	(3,2)	3
Device C	(3,3)	4
Device D	(3,4)	5
Configure		C
I/O Module Reset		RM
Unit Reset		RU
Exit		X
Logout		T
Enter Request	: C
Configuration
Module 1		1
Module 2		2
Module 3		3
Select Port		S
Exit		X
Enter Request:	2

By responding to the Enter Request: message at the end of the configuration menu with “2” you receive the configuration menu for Module 2 that looks similar to the following:

DS73 Ethernet Module

F 0.02 Copyright (c) 1997

Bay Technical Associates

Enter user name: user1
Enter password: BTA
Login successful.
Module IP Address:	200.4.3.72	Dial-In IP Address:	200.4.3.73
Subnet Mask:	255.255.255.0	Gateway Addr: 200.4.3.1
Primary DNS:	0.0.0.0.	Secondary DNS:	0.0.0.0.
Primary NBNS:	0.0.0.0.	Secondary NBNS:	0.0.0.0.
Ethernet Addr: 00.C0.48.1A.24.5D		ID MSG/Login: enabled/enabled
IP Address	1	Network Cable Connections: good
Module IP Address	1
Dial-In Ip Address	2
Subnet Mask	3
Gateway	4
Primary DNS	5
Secondary DNS	6
Primary NBNS	7
Secondary NBNS	8
User Name	9
Password	10
Module name	11
Exit	X

NOTE: For detailed configuration information see the DS-Series Owner’s Manual Number U140E121-03(Section 6).

IMPORTANT: There should be no active connections while configuring the unit. Reset the base unit after configuration.

5.1MODULE IP ADDRESS

9