39
Enabling or Disabling the FTP Access
To enable FTP transfers to and from your device:
1.Expand the Maintenance icon in the Tree frame.
2.Expand the Services
3.Click the General branch. The System Services display appears in the View frame.
4.In the FTP Server field, check (enable) or uncheck (disable) the Enable checkbox, then click the Apply button.
Enabling or Disabling the Telnet Access
To enable telnet access to your device:
1.Expand the Maintenance icon in the Tree frame.
2.Expand the Services
3.Click the General branch. The System Services display appears in the View frame.
4.In the Telnet Server field, check (enable) or uncheck (disable) the Enable checkbox, then click the Apply button.
Assigning a SYSLOG Server
NOTE: This task assumes that you have already configured the host and connected it to the IB fabric.
To assign a SYSLOG server to store logs from your device:
1.Expand the Maintenance icon in the Tree frame.
2.Expand the Services
3.Click the General branch. The System Services display appears in the View frame.
4.In the Remote Syslog Server field, enter the IP address of the remote server to accept messages from your device, then click the Apply button.
Assigning an Authentication Method
To assign an authentication method to your device:
1.Expand the Maintenance icon in the Tree frame.
2.Expand the Services
3.Click the General branch. The System Services display appears in the View frame.
4.In the Authentication Method field (under the Radius heading), click a radio button to select a method, then click the Apply button. Table
Table
Button | Description |
local | Authenticates user logins with the local CLI user database only. |
|
|
localThenRadius | Authenticates user logins with the local CLI user database; upon |
| failure, authenticates with the RADIUS server. |
|
|
radiusThenLocal | Authenticates user logins with the RADIUS server; upon failure, |
| authenticates with the local CLI user database. |