The HP Virtual Connect version 4.31 firmware package operates in an embedded environment within each Virtual Connect module; therefore, it is not dependent on any operating system.
For more information, see the HP Operating Systems and Virtualization Software Support for ProLiant Servers web page on the HP website (http://h18004.www1.hp.com/products/servers/software/index.html), or view the Operating Systems section for Integrity Servers on the HP website
IMPORTANT: Virtual Connect versions 4.30 and later no longer support
Languages
Languages supported for this release: English, Japanese
Enhancements
VC version 4.31 contains the following enhancement:
Support for Mozilla Firefox ESR 24.x and 32.x
VC version 4.30 contains the following enhancements:
•UEFI boot mode support Configure server boot modes.
•PXE IP boot order
Configure PXE IP boot order.
•FIPS mode
For a current status on FIPS certification, see the HP website (http://government.hp.com/Certifications.aspx).
•Configure partially stacked domains to isolate specific networks and fabrics.
•40Gb FIP snooping support
•Monitor, detect, and report pause flood conditions on uplink and stacking link ports.
•Configure SNMPv3 users, security levels, and informs.
Increase VC domain network management security and administrative frameworks.
•Configure more VLANs:
o Configure a maximum of 8,192 VLANs per domain.
o Configure a maximum of 4,094 VLANs per shared uplink set.
Languages 5