Installing and Configuring Serviceguard NFS
Configuring a Serviceguard NFS Package
NOTE
Copying the Template Files
If you will run only one Serviceguard NFS package in your Serviceguard cluster, you do not have to copy the template files. However, if you will run multiple Serviceguard NFS packages, each package must have its own package configuration file and control script.
Serviceguard NFS Toolkit requires Serviceguard A.11.13 (or above). To enable the File Lock Migration feature (available with 11i v1 and 11i v2), you need Serviceguard A.11.15 or above.
To ensure that the File Lock Migration feature functions properly, install
There is an additional NFS specific control script, hanfs.sh, which is delivered along with the Serviceguard NFS Toolkit product. All of the NFS specific functions and variables have been extracted from the original Serviceguard package control script to this control script. You must configure this control script, too.
For each Serviceguard NFS package, create a copy of the following scripts with a unique name. For example:
cd /etc/cmcluster/nfs cp nfs.conf nfs1.conf cp nfs.conf nfs2.conf cp nfs.cntl nfs1.cntl cp nfs.cntl nfs2.cntl cp hanfs.sh hanfs1.sh cp hanfs.sh hanfs2.sh cp nfs.flm nfs1.flm cp nfs.flm nfs2.flm
NOTE | The nfs.flm script is available on 11i v1 and 11i v2. |
|
|
34 | Chapter 2 |