Installing And Configuring
Configure the LDAP-UX Client Services
1.Password | 6.Protocols |
2.Shadow passwd | 7.Networks |
3.Group | 8.Hosts |
4.PAM | (Pluggable Authentication Module) 9.Services |
5.RPC | 10.Netgroup |
| 11.Automount |
Each services uses a standard object class (defined by RFC 2307)
You can remap any of these attributes to alternate attributes
Do you want to remap any of the standard RFC 2307 attributes?
Enter whether or not you want to remap the standard object class attributes to alternate attributes. You need to do this if your user and group data do not conform to the object classes defined in RFC 2307, posixAccount, posixGroup, shadowAccount, and so forth.
You can remap the attributes for any of the supported services: passwd, shadow passwd, group, PAM, netgroup, rpc, protocols, networks, hosts, automount and services. Select the service you want to remap. Then select the attribute you want to remap and enter the new attribute name. For example, you might map the standard UNIX user id number attribute uidnumber to an employeeID attribute.
By default,
Use the following steps if you want to remap the automount attributes to the nisObject automount attributes:
1.Enter yes for the following question:
Do you want to remap any of the standard RFC 2307 attributes? [yes]: yes
2.If you want to select the automount service, then enter 11 for the following question and press the return key:
Specify the service you want to map? [0]:11
3.Next, it will take you to the screen which shows you the following information:
Current Automount attribute names:
36 | Chapter 2 |