Protocol Specific Configuration
E1/T1 HDLC.FRAME Configuration Values
E1/T1 HDLC.FRAME Configuration Values
Poll Word
15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 |
| 5 | 4 | 3 | 2 | 1 | 0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0 | 0 | AZR | AZT | 0 | 0 | 0 | SS7 | FISU Flags |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All reserved bit positions must be filled with zeros (0).
FISU Flags - FISU inter-frame flag count (SS7 only)
Sets the number of flag octets to be inserted between transmitted FISU frames. The flags reduce the frequency of FISU transmission.
Recommended value - 6.
SS7 - Enable SS7 processing
Enables the automatic handling of transmitted and received FISU and LSSU frames. Refer to Appendix B , “Using the SS7 Mode Feature,” for details of the SS7 mode of operation.
AZT - Analyzer terminal for transmitted data
Enables this terminal for monitoring frames transmitted on the subchannel.
All transmitted frames are copied, and the copy delivered to the receiving application for this terminal. This terminal cannot be used to transmit frames.
AZR - Analyzer terminal for received data
Enables this terminal for monitoring frames received on the subchannel. All received frames are copied, and the copy delivered to the receiving application for this terminal. This terminal cannot be used to transmit frames.
40 | Chapter 4 |