Assembly

Remove the heater body and base from the box. Remove the packaging materials and keep for future storage.

Slide the neck of the heater head into the column connected by the cord, so that the holes in the neck align with the holes in the col- umn.

Insert and tighten the screws with a Philips screwdriver.

Slide the cord through the opening in the back of the base.

Insert the lip near the control panel into the opening in the front of the base. Push the body and base together. The tip-over safety switch should protrude out the bottom of the base.

Attach the base to the heater body by screwing on the fastening screw.