Installing on Windows systems
NOTE: For full installation details, see the HP Data Protector installation and licensing guide in the /docs directory of the top level of the Windows installation
Prerequisites
•Management Server (Cell Manager):
•256 MB RAM (512 MB recommended)
•190 MB disk space +2% of planned backup data
•Backup Client (Disk Agent):
•64 MB RAM (128 MB recommended)
•10 MB disk space
•Device Server (Media Agent):
•64 MB RAM (128 MB recommended)
•20 MB disk space
•User Interface (GUI):
•256 MB RAM
•100 MB disk space including 45 MB electronic manuals
•Java User Interface (Java GUI):
•1000 MHz Intel Pentium or equivalent (2.6 GHz Intel Pentium IV or equivalent recommended)
•512 MB (1 GB RAM recommended)
•200 MB disk space including online help (300 MB recommended)
•For a Java GUI Client, Java Runtime Environment (JRE) 1.5.0_06 or later minor version (such as 1.5.0_07)
If you plan to install all the components on the same system, the system must have 305 MB of disk space and at least 256 MB of RAM (512 MB recommended).
Installing Cell Manager
See http://www.hp.com/support/manuals and search for “Data Protector”. Select version 6.11 for platforms supported with this release.
Prepare for installation
1.On the system that is to be your Data Protector Cell Manager:
a.For a standalone tape drive, connect the tape device to the Data Protector Cell Manager and power it on.
Page 3