HP V6.1x Software manual Installing on Unix systems, Prerequisites HP-UX, Prerequisites Solaris

Page 6

Installing on UNIX systems

NOTE: For full installation details, see the HP Data Protector installation and licensing guide in the /docs directory of the DVD-ROM.

Installing Cell Manager

NOTE: For supported platforms, see

http://www.hp.com/support/manuals.

The following is an example of a Cell Manager installation with backup device locally attached using the default configuration.

NOTE: On all UNIX platforms, only the Java GUI is supported. This requires 75–200 MB of disk space, depending on which online help languages are installed. For English, only 75 MB is required. The disk space figures below include the Java GUI, Disk Agent, and Media Agent.

Prerequisites (HP-UX)

•Java JRE, 1.5.0_06 or later minor version

•HP-UX 11.x

•256 MB RAM (512 MB recommended)

•350–550 MB free disk space +2% planned backup data

Prerequisites (Solaris)

•Java JRE, 1.5.0_06 or later minor version

•Solaris 8/9/10

•256 MB RAM (512 MB recommended)

•350–550 MB free disk space +2% planned backup data

•root permissions on every target system

•ksh shell (provided by default)

Page 6

Image 6

Contents HP Data Protector 06.11 Contents Prepare for installation Installing on Windows systemsInstalling Cell Manager PrerequisitesInstall Data Protector To run the programInstalling clients To install remotely, from the Cell Manager GUITo install locally, on the intended system Installing on Unix systems Prerequisites HP-UXPrerequisites Solaris Procedure Prerequisites LinuxTo run Data Protector Remote installation Local installationConfiguring backup devices Next stepsConfiguring a standalone drive Select File LibraryFormatting media Backing up your system Defining a schedule for a simple backup routine To create the defined scheduleRestoring from a backup Data Protector documentation map AbbreviationsMap Data Protector integrations Licensing For more information