Installing clients
See http://www.hp.com/support/manuals and search for “Data Protector”. Select version 6.11 to find out about supported platforms with this release.
Prerequisites
•Cell Manager installed
•Administrator rights and password
•TCP/IP protocol and node name resolution enabled
RAM and disk
Client system component | RAM (MB) | Disk space (MB) |
Original GUI | 2561 | 1502 |
Java GUI3 | 512 (1,000 rec.) | 40 (60 rec.) |
Disk Agent | 64 (128 rec.) | 10 |
Media Agent | 64 (128 rec.) | 20 |
Inegration modules | 64 (128 rec.) | 20 |
English documentation & Help | n/a | 80 |
1Depends on the number of elements that need to be displayed at a time.
2The page file alone needs to be able to grow to about 3 times the physical memory
3The Java GUI also requires at least a 1 GHz Pentium III processor (2.6 GHz Pentium IV recommended)
To install remotely, from the Cell Manager GUI:
1.Log on to the system as Administrator.
2.Click Start > Programs > HP Data Protector > Data Protector Manager.
3.In the Data Protector Manager, switch to the Clients context.
4.In the Scoping Pane,
5.Follow the instructions.
To install locally, on the intended system:
1.Log on to the system as Administrator.
2.Run \i386\setup.exe.
3.Start the Client Installation.
4.Follow the instructions.
Page 5