NOTE: The node number range managed by this head node and the node number range of the entire cluster are typically the same.
•Node number list of all head nodes – If there is only one head node this entry, its node number, for example “0”. If there are multiple head nodes, this is a
•Alternate interconnect type – Must be one of the following. Entries are case sensitive.
◦ None
◦
◦
◦
GigE – When the interconnect is GigE.
10GigE – When the interconnect is 10GigE.
InfiniBand: When the interconnect is InfiniBand.
•Alternate interconnect alias name – The alternate interconnect alias prefix used in /etc/ hosts. The default is "anode".
•mpirun command – Full path to the mpirun command. The default is /opt/ platform_mpi/bin/mpirun.
•pdsh command – Full path to the Cluster
•Performance monitor command – Full path to the Cluster Test provided performance monitoring tools. Default is /opt/clustertest/bin/xclus.
•light command – Command used to turn node UID light on and off. Default is /opt/ clustertest/bin/light.
9.You are now ready to run Cluster Test.