1Unpacking and Placement
Unpacking Procedure
Note:
Box
Contents
Placing Your SXH2
Ventilation Requirements
The SXH2 is packaged for maximum protection. To open, sit the box upright and cut the reinforced tape at the top of the box. The product can now be removed.
Pull the foam protecting
The SXH2 Headphone amplifier is now unpacked and ready for further installation.
Please retain all packaging material for future transport.
1 x SXH2 Headphone amplifier
1 x Product manual
3 x Performance analysis charts
1 x Detachable AC power cord
The SXH2 should generally be placed close to your source equipment, thus keeping interconnect cabling between the SXH2 and associated components as short as practical. This will reduce the systems susceptibility to radio frequency interference and the negative effects associated with long cables.
The SXH2 is a low power amplifier. Ventilation requirements are not considered an important factor in product placement.
In the event that the SXH2 is to be incorporated into custom cabinetry, please refer to the dimensional information provided in the Physical Dimensions section of the manual (Chapter 12).
5