CONVEYOR CONTROL BOARD – CALIBRATION

A.Connect digital volt meter to the hall effect sensor. Black meter lead connected to black hall effect sensor lead, red meter lead to white hall affect sensor lead.

B.Turn conveyor control knob fully counter clockwise. Loosen knob and align with calibration line and tighten knob.

C.Set knob to 2 minute setting. Adjust “max” pot. On conveyor control to 219 Hz.

D.Set control knob to 20 minute setting, and adjust “min” pot. On conveyor control to 21.9 Hz. Recheck at 2 minute and 20 minutes until proper readings are achieved. seal pots with glyptol or nail polish.

CIRCUIT BREAKER

A.Shut off power at main breaker.

B.Remove control top and front panel.

C.Disconnect 2 wires from circuit breaker.

D.Remove knurled mounting nut and push out.

E.Reassemble in reverse order.

NOTE: Be sure to reset breaker before operation.

CONVEYOR DRIVE MOTOR – REPLACEMENT

A.Shut off power at main breaker.

B.Remove conveyor.

C.Remove control panel top and front cover.

D.Disconnect wiring from motor and mark for reassembly.

E.Remove sprocket from motor shaft.

F.Remove 4 screws and remove conveyor motor and mounting bracket.

G.Remove mounting bracket from conveyor motor assembly.

H.Reassemble in reverse order.

REVERSING CONVEYOR DIRECTION

A.Shut off power at main breaker.

B.Remove control panel top .

C.Reverse wires fastened to terminals A+ and A- on conveyor control board.(See schematic diagram for wire numbers)

D.Reassemble in reverse order.

HALL EFFECT SENSOR – REPLACEMENT

A.Shut off power at main breaker.

B.Remove control panel top and front cover.

C.Remove conveyor motor assembly.

D.Remove wire connector from hall affect sensor board.

E.Remove 2 screws from conveyor drive motor.

F.Remove sensor board from mounting bracket.

G.Reassemble in reverse order.

FUSEHOLDER – REPLACEMENT

A.Remove appropriate control box cover.

B.Remove 2 wires, note wire number and location.

C.Remove lock nut on back side of fuse holder and push out.

D.Reinstall in reverse order and check system operation.

GAS VALVE – REPLACEMENT AND ADJUSTMENT

A.Remove appropriate control box cover .

B.Disconnect the gas piping from the back of the unit.

C.Remove the 4 screws from the incoming nipple mounting bracket.

D.Remove incoming nipple.

E.Disconnect 2 plugs (1) 3prong and (1) 4 prong – note location.

Low Profile – 1600 Advantage Series Service Manual – International

13

Page 13
Image 13
Lincoln 1633-000-EA, 1634-000-EA Conveyor Control Board Calibration, Circuit Breaker, Conveyor Drive Motor Replacement

1633-000-EA, 1634-000-EA specifications

Lincoln 1634-000-EA and 1633-000-EA are two remarkable offerings from the Lincoln line, designed with an emphasis on performance, technology, and luxury. Both models are part of Lincoln’s ongoing commitment to provide exceptional vehicles that blend elegance with advanced features, catering to the needs of modern drivers.

The Lincoln 1634-000-EA boasts a powerful engine that delivers an impressive balance of efficiency and performance. This model is equipped with a turbocharged V6 engine, which provides quick acceleration and a smooth driving experience. With a well-tuned suspension system, the handling is responsive, allowing for a comfortable ride on various terrains.

On the other hand, the Lincoln 1633-000-EA presents a slightly different focus, prioritizing hybrid technology without sacrificing power. The hybrid powertrain provides an excellent combination of electric and gasoline performance, allowing for enhanced fuel efficiency while still managing to deliver a robust driving experience.

Both models come with advanced safety features, including an array of sensors and cameras that facilitate state-of-the-art driver assistance systems. These technologies include adaptive cruise control, lane-keeping assist, and automatic emergency braking, making every journey safer for both drivers and passengers.

Inside, both Lincoln offerings showcase luxurious interiors that are crafted from high-quality materials. The spacious cabin is designed for optimal comfort, offering ample legroom and headroom for all passengers. Additionally, the latest infotainment systems are integrated, featuring large touchscreens, smartphone connectivity, and premium sound systems.

Another standout characteristic of both models is their commitment to sustainability. Lincoln has focused on utilizing eco-friendly materials in the interiors and improving the overall efficiency of their vehicles, indicating a shift toward more environmentally conscious manufacturing practices.

The technological features of the Lincoln 1634-000-EA and 1633-000-EA extend beyond entertainment and safety. Advanced navigation systems, voice recognition functionalities, and over-the-air updates ensure that drivers remain connected and informed, no matter where their travels take them.

In conclusion, Lincoln 1634-000-EA and 1633-000-EA exemplify luxury performance vehicles that integrate modern technology and sustainability. With their powerful engines, advanced safety features, luxurious interiors, and commitment to environmental responsibility, these models set a benchmark in the automotive industry. Whether seeking performance or efficiency, Lincoln has ensured that these vehicles cater to the diverse needs of today's drivers.