REMOVAL, INSTALLATION & ADJUSTMENTS

MODEL SERIES 1633-000-EA, 1634-000-EA

CAUTION !

BEFORE REMOVING OR INSTALLING ANY COMPONENT IN THE

IMPINGER OVEN BE SURE TO DISCONNECT ELECTRICAL POWER AND GAS SUPPLY.

IGNITION CONTROL – REPLACEMENT

A.Remove appropriate control box cover.

B.Remove front portion of relay by releasing tabs on side pulling straight out (rocking motion).

C.Remove wires from plug-in terminal strip, note wire numbers and location.

D.Remove two screws from mounting bracket and remove.

E.Reassemble in reverse order. Check system operation.

BURNER BLOWER MOTOR – REPLACEMENT

A.Remove appropriate control box cover.

B.Unplug motor connector.

C.Remove three screws from blower tube at burner housing.

D.Remove air shutter assy. From old motor for installation on new motor assy.

E.Reassemble in reverse order and check system operation

NOTE : CHECK AIR SHUTTER ADJUSTMENT – should be set at ½ open.

BURNER INDICATOR LIGHT – REPLACEMENT

A.Remove control box cover.

B.Remove two wires from light housing.

C.Slide light housing sideways to remove.

D.Reassemble in reverse order and check system operation.

AIR PRESSURE SWITCH – REPLACEMENT

A.Remove control panel top.

B.Disconnect wires from switch making note of wire number and location for reinstallation.

C.Remove air tube from switch assembly.

D.Remove switch from wire hanger.

E.Install new switch in reverse, make sure air tube is not blocked or misaligned.

To adjust air pressure switch, remove cover from the switch to expose adjusting screw. To increase sensitivity, turn screw counter- clockwise ; to decrease sensitivity, turn screw clockwise. Check for proper line voltage switching from N.C. to N.O. as the air pressure switch closes.

CONVEYOR CONTROL POTENTIOMETER (10 K OHM ) – REPLACEMENT

A.Remove control box cover.

B.Loosen two allen screws and remove knob by sliding off shaft.

C.Remove nut from potentiometer shaft and push out.

D.Unplug wire connector from conveyor control board.

E.Reassemble in reverse order and check system operation.

F.Recalibrate conveyor control board.

CONVEYOR CONTROL BOARD – REPLACEMENT

A.Shut off power at main breaker.

B.Remove control panel top and front cover.

C.Disconnect wiring ( push on connectors ) from control board, note proper location of connectors for reinstallation and exchange boards on the mounting bracket before reinstallation.

D.Reassemble in reverse order and check system operation.

12

Low Profile – 1600 Advantage Series Service Manual – International

Page 12
Image 12
Lincoln 1634-000-EA, 1633-000-EA service manual REMOVAL, Installation & Adjustments

1633-000-EA, 1634-000-EA specifications

Lincoln 1634-000-EA and 1633-000-EA are two remarkable offerings from the Lincoln line, designed with an emphasis on performance, technology, and luxury. Both models are part of Lincoln’s ongoing commitment to provide exceptional vehicles that blend elegance with advanced features, catering to the needs of modern drivers.

The Lincoln 1634-000-EA boasts a powerful engine that delivers an impressive balance of efficiency and performance. This model is equipped with a turbocharged V6 engine, which provides quick acceleration and a smooth driving experience. With a well-tuned suspension system, the handling is responsive, allowing for a comfortable ride on various terrains.

On the other hand, the Lincoln 1633-000-EA presents a slightly different focus, prioritizing hybrid technology without sacrificing power. The hybrid powertrain provides an excellent combination of electric and gasoline performance, allowing for enhanced fuel efficiency while still managing to deliver a robust driving experience.

Both models come with advanced safety features, including an array of sensors and cameras that facilitate state-of-the-art driver assistance systems. These technologies include adaptive cruise control, lane-keeping assist, and automatic emergency braking, making every journey safer for both drivers and passengers.

Inside, both Lincoln offerings showcase luxurious interiors that are crafted from high-quality materials. The spacious cabin is designed for optimal comfort, offering ample legroom and headroom for all passengers. Additionally, the latest infotainment systems are integrated, featuring large touchscreens, smartphone connectivity, and premium sound systems.

Another standout characteristic of both models is their commitment to sustainability. Lincoln has focused on utilizing eco-friendly materials in the interiors and improving the overall efficiency of their vehicles, indicating a shift toward more environmentally conscious manufacturing practices.

The technological features of the Lincoln 1634-000-EA and 1633-000-EA extend beyond entertainment and safety. Advanced navigation systems, voice recognition functionalities, and over-the-air updates ensure that drivers remain connected and informed, no matter where their travels take them.

In conclusion, Lincoln 1634-000-EA and 1633-000-EA exemplify luxury performance vehicles that integrate modern technology and sustainability. With their powerful engines, advanced safety features, luxurious interiors, and commitment to environmental responsibility, these models set a benchmark in the automotive industry. Whether seeking performance or efficiency, Lincoln has ensured that these vehicles cater to the diverse needs of today's drivers.