E.Remove assembly and replace main orifice.

F.Reassemble in reverse order and check system operation. NOTE: Check all gas line fittings for leaks.

TEMPERATURE CONTROL POTENTIOMETER – REPLACEMENT

A.Remove control box cover.

B.Loosen screw and slide knob off potentiometer shaft.

C.Remove lock nut and push out.

D.Remove 3 wires from electronic temperature control, note wire color and location for reinstallation.

E.Reassemble in reverse order and check system operation.

THERMOSTAT, HIGH LIMIT, OVEN CAVITY – REPLACEMENT

A.Remove appropriate control box cover. Remove motor cover and remove oven back to access high limit thermostat.

B.Remove wires from thermostat, note wire numbers for reinstallation.

C.Remove mounting nut from high limit thermostat and remove high limit from oven.

D.Reassemble in reverse order. Check system operation.

ON-OFF SWITCH – REPLACEMENT

A.Remove control box cover.

B.Depress spring clips on side of switch and push out.

C.Remove wires from back of switch, note wire number and location.

D.Reassemble in reverse order and check system operation.

NOTE: Make sure switch housing is fully seated in control box housing.

DUAL TEMPERATURE DISPLAY – REPLACEMENT

A.Shut off power at main breaker.

B.Remove control panel top and front cover.

C.Remove all wires from temperature display and mark wires for reassembly.

D.Pry temperature display to remove from mounting tabs (this is a pressure fit

E.Reassemble in reverse order.

CALIBRATE TEMPERATURE

A.(see page 16 for connection of temperature sensor ) Set temp. control to 500° F . Allow temperature to stabilize.

B.“ Fine tune “ temperature setting to achieve measured temperature swings from 497°F to 503°F. When actual temperature falls between 497°F and 503°F, the display must show 500°F.

C.Adjust temp. adj. Pot. on temp display to achieve a display reading of 500°F.

TRANSFORMER, TEMPERATURE DISPLAY – REPLACEMENT

A.Remove control box cover and front panel.

B.Remove 5 wires (2 primary side, 3 secondary side ), note color and location of wires for reinstallation.

C.Remove 2 screws from transformer base and replace assembly.

D.Reassemble in reverse order and check system operation.

Low Profile – 1600 Advantage Series Service Manual – International

15

Page 15
Image 15
Lincoln 1633-000-EA Temperature Control Potentiometer Replacement, THERMOSTAT, High LIMIT, Oven Cavity Replacement

1633-000-EA, 1634-000-EA specifications

Lincoln 1634-000-EA and 1633-000-EA are two remarkable offerings from the Lincoln line, designed with an emphasis on performance, technology, and luxury. Both models are part of Lincoln’s ongoing commitment to provide exceptional vehicles that blend elegance with advanced features, catering to the needs of modern drivers.

The Lincoln 1634-000-EA boasts a powerful engine that delivers an impressive balance of efficiency and performance. This model is equipped with a turbocharged V6 engine, which provides quick acceleration and a smooth driving experience. With a well-tuned suspension system, the handling is responsive, allowing for a comfortable ride on various terrains.

On the other hand, the Lincoln 1633-000-EA presents a slightly different focus, prioritizing hybrid technology without sacrificing power. The hybrid powertrain provides an excellent combination of electric and gasoline performance, allowing for enhanced fuel efficiency while still managing to deliver a robust driving experience.

Both models come with advanced safety features, including an array of sensors and cameras that facilitate state-of-the-art driver assistance systems. These technologies include adaptive cruise control, lane-keeping assist, and automatic emergency braking, making every journey safer for both drivers and passengers.

Inside, both Lincoln offerings showcase luxurious interiors that are crafted from high-quality materials. The spacious cabin is designed for optimal comfort, offering ample legroom and headroom for all passengers. Additionally, the latest infotainment systems are integrated, featuring large touchscreens, smartphone connectivity, and premium sound systems.

Another standout characteristic of both models is their commitment to sustainability. Lincoln has focused on utilizing eco-friendly materials in the interiors and improving the overall efficiency of their vehicles, indicating a shift toward more environmentally conscious manufacturing practices.

The technological features of the Lincoln 1634-000-EA and 1633-000-EA extend beyond entertainment and safety. Advanced navigation systems, voice recognition functionalities, and over-the-air updates ensure that drivers remain connected and informed, no matter where their travels take them.

In conclusion, Lincoln 1634-000-EA and 1633-000-EA exemplify luxury performance vehicles that integrate modern technology and sustainability. With their powerful engines, advanced safety features, luxurious interiors, and commitment to environmental responsibility, these models set a benchmark in the automotive industry. Whether seeking performance or efficiency, Lincoln has ensured that these vehicles cater to the diverse needs of today's drivers.