Lamp Replacement
Metal Halide Lamp Warning!
This fixture is fitted with a metal halide lamp which is highly susceptible to damage if impro[erly handled. Do not touch the bulb of the lamp with bare fingers(this can cause damages). The lamp contains small quantities of materials that will be harmful to the envionment, please dispose of the damaged lamp properly.
To replace the lamp
1.Disconnect the fixture from power and allow the lamp to cool.
2.Loosen the two knurled screws and remove the top cover.
3.Loosen the 2 thump screws from the lamp socket.
4.Gently take the old lamp out.
5.Replace the new lamp and refit the 2 thumb screws.
6.Put in the new lamp securely into the socket. Please note the protuberance of bulb shall be upward orientation to obtain equal intensity distribution(see figure).
7.Tighten the 2 thumb screws and reassemble in reverse order.
Remember always replace with the same type lamp and fuse.
Fuse Replacement
1.Disconnect the fixture from power.
2.With a flat screwdriver wedge the fuse holder out of its housing.
3.Remove the old fuse from the holder and replace with the exact same type fuse.
4.Replace the fuse holder in to the fuse holder housing.
5.Reconnect main power.
5
