Operation Guide
This is a High-Tech product. When you are sure you have set
up this unit properly, you can operate this unit freely.
1.Always be sure to mount this unit in the area that will allow proper ventilation.
2.Check that the local power outlet match that of the required voltage of your unit.
3.Plug this unit into the AC power outlet, turn the switch on.
4.The lamp will be lit and the cooling fan will start immediately.
Important!
Never disconnect or reconnect the power frequently during operation, this will shorten the lamp life.
Wait at least 10 minutes to cool down the lamp completely before restarting this unit. (the warm lamp will cause the igniter holding the lamp in a glow state.)
6
