General Information, Unpacking | Elation Professional 300

General Information

Thank you for your purchase of this product. Every product has been

thoroughly tested and carefully packed before delivery. Unpack the

shipping carton carefully, saving the carton and all packaging materials

for possible later use.

Check carefully for sure your product is not damaged and all accessories

not missing. If your product appears to be damaged or missing, please do

not use it and contact your authorized dealer immediately.

300 Watt HTI 300 metal halide lamp

1.5m 3-pin American Plug mains cable with female IEC plug Support for lens and effects, standard

Standard lens (1:2.4 / 100 mm) Two electrified guides

Two bakelite screws User's guide

[This product must be earthed.

[Do not make any inflammable liquids, water or metal objects

enter this unit.

[Very hot lamp. Disconnect the power and wait for at least 10

minutes before you can replace the lamp.

[Make sure the fan and the air inlets are clean and not blocked by

anything before usung.

[Do not operate this unit if the ambient temperature(Ta) exceeds

40 C(104 F).

[Do not stare directly into the light, as may do harm to your eyes.

[Keep all flammable meterials at least 1 meter away from this unit.

[Never operate this unit when its cover is removed.

[Keep this unit out of children.

[Do not dismantle or modify the unit.

[Unplug the fixture from the AC outlet and allow the fixture to cool

before any service.