Moving the selection area
You can move the selection area to a different location in the preview area.
1Position the pointer inside the selection area.
The pointer changes to 
.
2Drag the selection area to its new location.
Adjusting the size of selection area
You can change the size of the selection area two ways:
■click and drag one of the handles on the selection border (see the picture on page 53)
■set dimensions for the selection area in the
Dimensions tool
Use the handles on the border
1Position the pointer over the handle on the corner or side of the selection border you need to adjust.
The pointer changes to a bidirectional arrow (see page 24).
2Click on the handle and drag the side of the border to a new location.
3Release the mouse button.
Use the Dimensions tool
You can use the fields in the Selection Area Dimensions area of the Dimensions tool to define the exact size of the selection area. (See page 30 for more about the Dimensions tool.)
1From the Tools menu, select Dimensions.
The Dimensions tool appears.
2Click the list button in the Units field and select the units you want to work with.
3To set the width of the selection area, type the width value in the Width field of the Selection Area Dimensions area.
4To keep the same aspect ratio for the selection area (keep the Selection Area Dimensions area height value proportional to the new width value), press Enter,
to leave the existing Selection Area Dimensions area height value, click in any other field of the Dimensions tool.
3
Scanning pictures
Book Contents
Index
➮
➮HP PrecisionScan Pro User’s Guide | 55 |