Table of Contents
Section 1 - General Information
1.1Warranty
1.2Unpacking
1.3Package Contents
1.4Description
1.5Specifications and Pump Performance
Section 2 - Set Up
2.1Location
2.2Reservoir Fluids
2.3Pump, Hoses and Couplings
2.4Setting Up a Closed System or Cooling Coil to the Chiller
2.5Setting Up an Open Bath System to the Chiller
Section 3 - Operation
3.1Power Requirements
3.2Temperature Setting and Adjustments
3.3Selection of Celsius or Fahrenheit
3.4Setting the Readout High Limit
3.5Controller Display Messages
3.6Draining the Unit
3.7Controller Default Settings
Section 4 - Diagram of Models
Section 5 - Maintenance
5.1Standard Magnetic Drive Centrifugal Pump Motor
5.2Positive Displacement High Pressure Pump Motor
5.3Fluid Filter Included With High Pressure Pump
5.4Refrigeration Air Vents & Air Filter
Section 6 - Troubleshooting
6.1Unit Disabled
6.2No Pumping
6.3Insufficient Pumping
6.4No Cooling or Insufficient Cooling
Section 7 - Service and Technical Support
Section 8 - Replacement Parts
This symbol marks chapters and sections of this instruction manual which are particularly relevant to safety.
When attached to the unit, this symbol draws attention to the relevant section of the instruction manual.
This symbol indicates hazardous voltages may be present.
2