Connections and Setup
DVD Player + TV + VCR + Satellite Receiver
1.Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.
2.Connect the video cable.
•Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD Player, and to the Video Input jack on your TV.
OR
•
3.Connect a coaxial cable to the antenna output jack on the VCR and to the Antenna Input jack on the television.
4.Use a coaxial cable to connect the antenna output on the satellite receiver to the antenna input on the VCR.
5.Plug the power cord into an AC outlet.
Go to page 19
chapter 1 | 15 |