|
| Reference |
| Troubleshooting |
|
|
|
|
| DVD Problem | Solution |
|
|
|
| Subtitle and/or audio | If the subtitle and/or audio language does not exist on the disc, the |
l | language is not the one | initial settings will not be seen/heard. The disc’s priority language is selected instead. Set |
| selected from the initial | the subtitle and or audio language initial setting manually. |
| setting |
|
|
|
|
| No | The OFF setting is selected for OSD Display; select ON in the Setup menu. |
|
|
|
| The menu is displayed in a | The Menu Language preference is set to that language. With no disc playing, |
| foreign language | press the MENU button on the remote. From the main menu, press 3 to access the |
|
| PLAYER MENU LANGUAGE screen. |
| Play doesn’t begin when | The rating level has been set and the disc is subject to that restriction. |
| a title is selected |
|
|
|
|
| No forward or reverse scan | Some DVDs have sections that prohibit rapid scanning, or title and chapter skip. |
|
|
|
| Disc won’t play | • Both the player and the DVD is coded by region. If the regional codes don’t |
|
| match, the disc cannot be played. This player is Region No. 1. Check the disc |
|
| code. |
|
| • Verify that the disc is a type that this player can read. See page 22. |
|
| • Clean the disc. |
|
| • Try another disc to see if the disc that won’t play is bad. |
|
|
|
| Desired angle cannot be changed | Some DVDs do not have the |
|
| certain portions. |
|
|
|
| Picture is not displayed | Make sure the TV SCREEN feature in the Setup menu is set correctly for |
| with correct aspect ratio | your television. |
|
|
|
| Forgot Rating Limit Password | With the power on, press and hold the STOP and PLAY/PAUSE buttons on the player. |
|
| This resets the password feature and all other settings to the initial factory settings. You |
|
| may be required to select a menu language the next time you power up. |
|
|
|
| Cannot copy discs to video tape | This player is equipped with anticopy protection. |
|
|
|
| “will not read disc” or | Turn the player off and unplug it to reset the DVD player. Wait approximately 2 |
| other error message | minutes, plug the player back in and turn it on. |
|
|
|
chapter 6 | 55 |